Build 'The Stand'
Whats in the box:
- 2 x Stand frames
- 2 x horizontal braces
- 4 x adjustable feet
- 8 x Bolts
- 1 x Allen key
- Position The Providers base tray upside down so you can attach the legs. Careful not to scratch The Provider when doing this, you might want to put a towel or a blanket down to protect it.
- Attach the first stand frame to the runners that are already attached to the underside of the planter. Use 2 bolts for this, tighten them firmly but not overtight. You will want to tighten each bolt a little bit at a time so the frame lines up nicely.
- Repeat step 2 for the other stand frame.
- Insert the first horizontal brace between the stand frames. Use 2 bolts to secure the brace between the stand frames, tighten them firmly but not overtight.
- Repeat step 4 for the other brace.
- Insert your adjustable feet to the bottom of each leg. If the surface your planter is going on is flat, these will want to be screwed all the way in. If the surface is on a slope you will want to adjust these accordingly to level your planter.
- Stand your planter up with the legs attached. Place the planter in your desired location before filling with soil.
You’re ready to plant where you can’t!
If you have any questions or problems, please contact us – hello@plantwhereyoucant.com